Racing parts

Ready-to-install center-lock kit, available for various models: F82, F80, F87, E92, E46. Please select your vehicle accordingly. Matching NTM center-lock wheels, AP Racing PRO 5000 R brake kits, and GTR axles are also available in our online shop.

Eight-piece widebody GTR kit, made of carbon fiber. The following parts are included: 1x front bumper, 1x rear bumper, 2x fenders, 2x side skirts, 2x rear wheel arches. Front wheels: 9 to 11 inches; rear wheels: 11 to 13 inches.

Lightweight, 8-piece widebody kit made of carbon fiber. The following parts are included: 1x front bumper, 1x rear bumper, 2x fenders, 2x side skirts, 2x rear wheel arches. We recommend our GT2 diffuser, GT3 rear wing, hood, and doors to complement the body kit.

Lightweight, three-piece NTM Pista III racing wheel in 18", manufactured to customer specifications in width and offset. The wheel centers are available in gold, silver, gray, or black and can optionally be ordered with a 5x120 bolt pattern or for center lock. A set of 18" NTM Pista III alloy wheels is supplied. After ordering, please inform us of your desired color and wheel dimensions. If needed, we will send you a data sheet where you can enter your vehicle's measurements so we can calculate the ideal wheel dimensions for you.

Our Clubsport Airbox is a complete, 5-piece intake system made of carbon fiber. Combined with ECU remapping, it delivers an increase in power of approximately 25 hp. The air filter is included. Our airbox is available in either a matte or glossy finish.

Racing carbon fiber intake for S65 racing engines in stock position for maximum fresh air supply. To install the airbox, the radiator must be relocated to an angled position. The air conditioning system must be removed; not suitable for street engines. Available with optional matte or gloss clear coat.

100-liter fuel tank, like the GT4, without any additional parts. The matching tank tray is available separately in our shop.

This cooling system is an effective cooling solution for S65 engines with a horizontal water radiator. The following parts are included: Full Race Step 3 water radiator, horizontal aluminum radiator frame (for engines in standard position, different from the one pictured), water thermostat kit, and hose kit.

Ready-to-install short differential suitable for the M3 E92 with dual-clutch transmission and factory limited-slip differential. Our modified differential can be installed plug-and-play; no software adjustments are necessary. Reference value: 291,2 km/h in 6th gear with the standard 3,15:1 gear ratio compared to 270,7 km/h in 6th gear with the shorter gear ratio.

Optimized S65 airbox with carbon fiber air intake through the kidney grilles. This airbox was developed for use in near-production racing classes such as SP7 VLN. To install the optimized S65 stock airbox with carbon fiber air intake, the radiator must be tilted – we offer a suitable radiator support bracket for this purpose. A stock airbox must be supplied as an exchange unit.

Effective intercooler for S65 engines with G-Power supercharger. Not a plug-and-play installation (e.g., modification of the radiator support is required); air conditioning must be removed.

2,0 m wide GT3 rear wing (top) made of carbon fiber + outer plates on the left and right for stable mounting to the vehicle body. The mounting point spacing is 1,27 m; customer specifications for the mounting points can be accommodated during manufacturing. The wing profile only is supplied. A pair of wing mounts (similar to the Z4 GT3) can be ordered as an option. The smaller rear wing profile 8333142 is no longer available from BMW Motorsport and cannot be supplied. BMW part numbers for the original parts: GT3 rear wing (top): 8332663; Plate 2x (left/right): 8332829

A pair of lightweight carbon fiber doors with frames for fixed window mounting, suitable for the BMW M3 E92. Plastic windows and matching mirrors (GTR / GT2) are also available in our product range.

High-quality stainless steel exhaust manifold for S65 engines. Its flow-optimized design allows for faster exhaust gas flow, reducing cylinder head temperatures by approximately 15°C. Even greater heat reduction can be achieved with the optional ceramic coating. Our Clubsport exhaust manifold is compatible with all common aftermarket exhaust systems, such as Akrapovic, Supersprint, and Eisenmann. 

Rear wing with wedge lip and long supports (supports not like the original).

Limited-slip differential with 75% locking effect made of high-strength and durable material, specially developed for use in racing.

Lightweight Cup rear wing profile, made of carbon (approx. 2,6 kg), optionally with short or long wing supports.

A pair of widened fenders and attachments for the standard bumper, made of carbon fiber. 11" wide rims can be fitted to the front axle.

Lightweight Cup rear wing profile, made of carbon (approx. 2,6 kg) with large side plates and high wing supports.

Lightweight GTR carbon fiber hood, designed for the BMW M3 E92. The hood features CNC-machined fiberglass vents and a distinctive power dome in the style of the F82. We recommend securing the hood with quick-release fasteners. Upon request, the hood can be supplied with pre-cut openings for AeroCatch fasteners. Weighing approximately 5,5 kg, our GTR carbon fiber hood offers a significant weight reduction compared to the stock hood. The hood is constructed with a robust inner frame, ensuring compatibility with the original hood. Due to its design and manufacturing process, this GTR hood is not available in a visible carbon fiber finish. Our GTR hood is not compatible with the BMW M3 E90 or the non-M3 models E90, E91, E92, and E93.

Universal electric power steering system including lines, connectors, power steering pump, and electronics kit. Can be used in vehicles such as the E30, E36, E46, E92, etc. An optional bracket for mounting on the E92's frame rail is available. We use ATF II fluid to fill the electric power steering system.

Lightweight carbon fiber door panels, suitable for the M3 E92. Rear side panels can be ordered separately as an option. Our carbon fiber door panels require modification to fit the factory doors; mounting hardware is not included. 

Rear wing race profile, 1,50m wide, made of carbon fiber. Mounting brackets are not included and must be custom-made for the vehicle.