Racing parts

Ready-to-install center-lock kit, available for various models: F82, F80, F87, E92, E46. Please select your vehicle accordingly. Matching NTM center-lock wheels, AP Racing PRO 5000 R brake kits, and GTR axles are also available in our online shop.

GTR US body kit, consisting of: 1x front bumper, 1x rear bumper, 2x fenders, and 2x rear wheel arch extensions. Modifications to the vehicle are required. The parts are made of carbon fiber.

Lightweight, three-piece NTM Pista III racing wheel in 18", manufactured to customer specifications in width and offset. The wheel centers are available in gold, silver, gray, or black and can optionally be ordered with a 5x120 bolt pattern or for center lock. A set of 18" NTM Pista III alloy wheels is supplied. After ordering, please inform us of your desired color and wheel dimensions. If needed, we will send you a data sheet where you can enter your vehicle's measurements so we can calculate the ideal wheel dimensions for you.

Complete GTR front axle, suitable for M3 E46 including axle carrier, uniball control arms and mounts. 

Widebody kit GTR suitable for BMW M3 E46, consisting of: 1x front bumper, 1x rear bumper, 2x fenders, and 2x rear wheel arch extensions. The lightweight components are made of carbon fiber. Modifications to the vehicle are required during installation. Our body kit widens the track by approximately 3-4 cm. 280-series tires from Michelin and Pirelli can be used on the front axle (Dunlop tires are too wide). We also recommend our universal rear diffuser and our carbon fiber air intakes for brake cooling. The aforementioned lightweight components for completing the vehicle are also available from us.

Six-piece widebody kit made of carbon fiber, suitable for the sedan (facelift), optionally with fenders for 17" (as on the white vehicle) or 18" wheels (as on the blue vehicle), consisting of: 1x front bumper (EUR 1.252,10 net / EUR 1.490 incl. 19% VAT, unit price) 1x rear bumper (EUR 1.168,07 net / EUR 1.390 incl. 19% VAT, unit price) 2x front fenders (EUR 630,25 net / EUR 750 incl. 19% VAT, unit price each) 2x rear quarter panels (EUR 315,13 net / EUR 375 incl. 19% VAT, unit price each) Lightweight components must be adapted to the bodywork.

Complete GTR rear axle including axle housing, wheel carriers and control arms. 

Lightweight, carbon fiber body kit including 1x bumper with splitter and brake cooling air intakes + 2x widened fenders. Our fenders widen the front axle by approximately 30mm per wheel, allowing the use of 10x18 ET15 wheels with 265 tires. Individual parts are not compatible with factory parts.

High-volume carbon fiber airbox for S54 racing engines. Matching racing intakes for fresh air supply through the kidney grilles are available in our shop. Mounting the airbox requires relocating the radiator to an angle. 

2,0 m wide GT3 rear wing (top) made of carbon fiber + outer plates on the left and right for stable mounting to the vehicle body. The mounting point spacing is 1,27 m; customer specifications for the mounting points can be accommodated during manufacturing. The wing profile only is supplied. A pair of wing mounts (similar to the Z4 GT3) can be ordered as an option. The smaller rear wing profile 8333142 is no longer available from BMW Motorsport and cannot be supplied. BMW part numbers for the original parts: GT3 rear wing (top): 8332663; Plate 2x (left/right): 8332829

Order lightweight carbon fiber doors here, either 2 for the coupe or 4 for the sedan. Matching Lexan windows, as well as GTR or GT2 mirrors, are also available in this shop.

Rear wing with wedge lip and long supports (supports not like the original).

Carbon fiber airbox for racing applications. The air collector and intake housing are included. The matching kidney grille intake is also available in our online shop. Optionally, you can order the airbox with a connecting ring (not sold separately) or a racing fresh air intake.

High-quality carbon fiber airbox for the S54 engine. We also offer an air intake with air filter, which can be purchased separately.

Lightweight Cup rear wing profile, made of carbon (approx. 2,6 kg), optionally with short or long wing supports.

Performance-optimized exhaust manifold for S54 racing engines (inlet diameter: 48/45mm, outlet diameter: 63/60mm) available. The optional ceramic coating reduces heat generation.

Lightweight Cup rear wing profile, made of carbon (approx. 2,6 kg) with large side plates and high wing supports.

Lightweight and high-quality carbon fiber roof with a clear coat finish, suitable for the M3 Coupé. The carbon fiber roof weighs less than 4 kg. 

Lightweight, carbon fiber GTR hood for BMW M3 E46, including CNC-machined fiberglass air vents with F82 power dome. We recommend installing quick-release fasteners; the hood can also be supplied with holes for AeroCatch fasteners. Our GTR hood weighs approximately 5,5 kg. Please note: We manufacture the carbon fiber hood with an internal frame, allowing for installation just like the original part. It is not possible to produce the GTR hood in carbon fiber with the carbon fiber surface exposed. Our GTR hood is only compatible with the BMW M3 E46 (Coupé and Convertible) and is not compatible with non-M3 models.

Universal electric power steering system including lines, connectors, power steering pump and electronics kit. We use ATF II fluid to fill the electric power steering system.

Race radiator kit, suitable for the M3 E46, to improve the cooling of the gearbox and differential. Hoses not included.

Group H rear wing profile made of carbon fiber, visible from the outside. Wing supports are not included and must be custom-made for the vehicle.