Racing parts

Carbon parts package suitable for BMW M3 E30 (2-door sedan), consisting of: DTM 1992 front bumper including brackets, DTM 1992 lip, 2x DTM 1992 fenders for 18" rims, hood with inner frame, 2x doors, 2x DTM 1992 side skirts, 2x side panels, roof attachment, trunk lid, rear wing with flap like DTM 1992, rear bumper including brackets.

New original BMW M3 E30 Sport Evolution S14 2,5 crankcase, BMW part number: 11 11 1 417 225. Supplied without pistons.

Two new aluminum kickstands, like the 1992 DTM stand (magnesium). Wheel bearings, ABS trigger, and handlebar mount are included.

Multi-piece Group A racing wheel suitable for BMW M3 E30 in 17", manufactured to customer specifications in width and offset. The wheels are supplied with a gold center, a classic wheel bowl, and are available with either a 5x120 bolt pattern or center lock. The price is per set (4 pieces). Sold exclusively for racing use; no certification or road approval is available. Order the wheels, for example, in the 5x120 sizes 4x 8x17, 2x 8,5x17 and 2x 9x17, or for center lock in 4x 9x17.

Lightweight, three-piece NTM Pista III racing wheel in 18", manufactured to customer specifications in width and offset. The wheel centers are available in gold, silver, gray, or black and can optionally be ordered with a 5x120 bolt pattern or for center lock. A set of 18" NTM Pista III alloy wheels is supplied. After ordering, please inform us of your desired color and wheel dimensions. If needed, we will send you a data sheet where you can enter your vehicle's measurements so we can calculate the ideal wheel dimensions for you.

Ready-to-install racing fuel tank suitable for BMW M3 E30, including pumps, brackets, lines, and end cap. The pipe connecting the filler neck to the tank is not included. 

Ready-to-install AP Racing Pro 5000+ Radical brake system including brake hubs, brake discs, calipers, brake pads, and brackets, suitable for BMW M3 E30. Supplied ready for installation. Order the front brakes with 6-piston calipers in either 355x32 mm (recommended wheel size at least 8x17) or 330x32 mm (recommended wheel size at least 8x17), and the rear brakes with 4-piston calipers in 304x28 mm.

Ready-to-install quick lifting system, suitable for BMW M3 E30.

Ready-to-install center-lock kit with all mounting hardware, suitable for BMW M3 E30. Brake discs and hubs must be priced separately. Matching center-lock wheels can also be ordered from our online shop.

Our Step II flat slide carburetor, DTM 1992 specification, is available in either 48mm or 49,5mm diameter. It is compatible with BMW M3 E30 S14 engines and can increase performance by up to 10 hp. The carburetor is supplied without a potentiometer.

Lightweight, carbon fiber front bumper designed for the BMW M3 E30, as used in the 1992 DTM season. Integrated carbon fiber turn signal mounts (e.g., for LEDs) allow for easy lens replacement. The bumper comes complete with two side mounting brackets for bonding to the body. A slightly heavier version (approx. 3,95 kg) or an ultralight race version (approx. 3,10 kg) are available for the BMW M3 E30. Two conical mounting brackets are also available as an option.

Ready-to-install pedal box suitable for BMW M3 E30, kit includes pedal box, 3x slave cylinders, 3x reservoirs, bracket and cable.

Oil pan upper section suitable for BMW M3 E30 S14 racing engines with larger oil capacity, as specified in the 1992 DTM. The oil pan is supplied in individual parts. The upper and lower sections are shown in the pictures as examples. The oil sump pan (lower section) and the S14 engine block reinforcement are also available from us.

Purchase a pair of carbon fiber doors here, specifically designed for the BMW M3 E30. Installing these lightweight components will significantly reduce the weight of your race car. The set includes two bare doors without any additional parts, featuring carbon fiber interior trim panels. Matching Group A or DTM 1992 mirrors for the BMW M3 E30 are also available in our shop.

Lightweight, carbon fiber roof attachment/rear window frame for BMW M3 E30 - available in unpainted or exposed carbon fiber. The exposed carbon fiber version weighs only approximately 1,85 kg. A carbon fiber lower reinforcement for the roof extension can be ordered separately.

S14 Airbox Version 3, suitable for the BMW M3 E30, with four additional fuel injectors (top) for S14 racing engines as used in the 1990/1991 DTM season. Available for either 48mm or 49,5mm flat slide carburetors. Order the airbox with or without a siphon.

S14 Airbox Version 4 with four additional injectors (below) suitable for BMW M3 E30 with S14 racing engines, as used in the 1992 DTM. The pipes are slightly shorter and thicker than those of Version 3. Available for either 48mm or 49,5mm flat slide carburetors. Order the S14 Airbox with or without a siphon, suitable for the BMW M3 E30.

Complete Group A exhaust system for BMW M3 E30, made of stainless steel, starting from the 60mm diameter exhaust manifold and X-pipe. The DTM-style tailpipes have a diameter of 2 x 76mm. A matching exhaust manifold (optimized Sport Evolution version) is also available in our catalog. Catalytic converters for welding in are not available from us.

High-strength connecting rod for performance-enhanced S14 engines. Price is per set (four pieces).

16 valves suitable for the S14 engine in the BMW M3 E30, optionally in Sport Evolution size 8x 38,4mm intake valves and 8x 32mm exhaust valves or as Race 8x 39mm intake valves and 8x 33mm exhaust valves.

Universal electric power steering kit suitable for BMW M3 E30 for retrofitting electric power steering. The kit includes lines, connectors, power steering pump, and electronics. ATF II fluid, for example, can be used to fill the electric power steering system. The pump can be mounted anywhere; the installation images in a BMW M3 E30 are for illustrative purposes only.

Lower oil sump pan suitable for BMW M3 E30 S14 racing engines with larger oil capacity, Group A/DTM standard. The oil sump pan is supplied in individual parts. The engine block reinforcement and the upper part can be purchased separately from us. The upper and lower parts are shown in the images as examples. The upper part can also be purchased in our online shop.

Differential ratio suitable for BMW M3 E30 (188) - available in the following ratios: 4,75:1, 5,13:1, 5,28:1 and 5,44:1. You will also find other differential accessories in our catalog, such as a 75% limited-slip differential or a differential oil cooler kit suitable for the BMW M3 E30.

Lightweight dashboard made of carbon fiber, specifically designed for the BMW M3 E30 and finished with a matte clear coat to reduce sun glare. Delivered as pictured – the instrument cutouts can be positioned as desired.